Install Control and Inspection Planning using Deployment Center

Add the Control and Inspection Planning application to your existing Teamcenter environment through a series of tasks, from selecting the application and entering configuration parameters to generating and running deployment scripts.

Prerequisites

Dispatcher

is set to run various user tasks in the background.

Procedure

1. Log on to Deployment Center and select the environment to which you want to add Control and Inspection Planning.

2. Go to the Applications tab. Click Add or Remove Selected Applications .

3. In the Available Applications panel, use the web browser search to find the following applications, select the applications, and then click Update Selected Applications.
   
   
   Teamcenter > Teamcenter > Characteristics Indexer
   
   Teamcenter > Teamcenter > Content and Document Management > Document Management Client Application
   
   Teamcenter > Teamcenter > MBSE a La Carte > Parameter Management
   
   Teamcenter > Teamcenter > Teamcenter Quality > Control and Inspection Plan
   
   Deployment Center automatically selects any additional dependent applications. Note Ensure that you have installed the DPV Inspection Process Author license (dpv_process_auth) for quality engineers to generate a DPV workbook from a Control Plan.

4. In the Selected Components list of the Components tab, note any remaining components whose configuration status is not 100%. Select each incomplete component, enter required parameters, and save component settings until all components in the environment show a configuration status of 100%.
   When all components are fully configured, the Deploy tab is enabled.

5. In the Deploy tab, to generate deployment scripts, click Generate Install Scripts.
   When script generation is complete, note any special instructions in the Deploy Instructions panel.

6. Locate the deployment scripts, copy each script to its target machine, and then run each script on its target machine.
   For more information about running deployment scripts, see Run the deployment scripts in the Deployment Center ─ Usage help. If you face any issues during the deployment, see Troubleshooting deployment in the Deployment Center ─ Usage help.